My contact person

igus® (India) Pvt. Ltd.

36/1, Sy No. 17/3, NCPR Layout, Euro School Road,

Dodda Nekkundi Indl Area, 2nd Stage, Mahadevapura Post,

Bangalore- 560048

+91 80 68127800

+91 80 68127802

Send message

See all contacts

IN(EN)

System E6.1: new generation of quiet running and cleanroom suitable echains®

After 10 successful years as a cleanroom and "whisper" chain, the new generation is waiting in the wings. Aside from the tried-and-tested uses of the E6, the new generation offers additional advantages which significantly simplify operation. In addition, design changes have improved accessibility to the interior, reduced weight and made assembly easier.

Order a free sample now

Option without camber (NC) simply by turning the inner link
Extremely quiet due to the small pitch and "brake" in the stop-dog system
(E61.29.070.055.0 at 1m/s = 32dB(A) according to igus internal test 4479)
Extremly low vibration
Low-abrasion connector system (no bolts and holes necessary)
Virtually no polygon effect, thereby "smooth rolling" operation
Smooth interior design for a long lifetime for cables and hoses
E61.29 series: cross bars on both sides can be snapped open and removed along the inner and outer radii
Weight savings approx. 30% compared to the E6 system
Cost-effective

More advantages

Crossbar openable along inner and outer radius, either both sides

E61.29

Inner height hi: 29mm
Inner widths Bi: 30-140mm
Bend radii R: 55-150mm
Pitch: 22mm

E61.29 e-chain®

Crossbars removable along the inner and outer radius, from both sides

EF61.29

Inner height hi: 29mm
Inner widths Bi: 30mm
Bend radii R: 140mm
Pitch: 55mm

EF61.29 e-chain®

Crossbars removable along the inner and outer radius

E61.35

Inner height hi: 35mm
Inner widths Bi: 30mm
Bend radii R: 140mm
Pitch: 55mm

E61.35 e-chain®

E61.40

Inner height hi: 40mm
Inner widths Bi: 40mm
Bend radii R: 300mm
Pitch: 63mm

E61.40 e-chain®

E61.52

Inner height hi: 52mm
Inner widths Bi: 40mm
Bend radii R: 300mm
Pitch: 75mm

E61.52 e-chain®

E61.62

Inner height hi: 62mm
Inner widths Bi: 50-400mm
Bend radii R: 115mm
Pitch: 50mm

E61.62 e-chain®

E61.80

Inner height hi: 80mm
Inner widths Bi: 50mm
Bend radii R: 600mm
Pitch: 150mm

E61.80 e-chain®

e-chain® selection aids

You can find the right e-chain® quickly by entering concrete parameters and with the aid of a comparison table.

Selection aids

Assembly instruction

Joining, separating and opening of the e-chain® and e-tubes.

Assembly instruction

Application examples

Applications in various industrial sectors and in the igus® test laboratory.

Go to the applications

e-chain with 6.1 – swivelable crossbars

To protect the cables and hoses in the e-chain® even more effectively the design of the new E6.1 has been majorly advanced. Opening crossbars are very smooth and rounded, as is the transition from the chain link to the opening crossbar. All injection and marking locations were positioned outside of the cable cross-section.

Typical industrial sectors and applications

semi-conductor industry

Printer/Plotter industry

For applications with max. accelerations

When minimum noise and wear are important

Y = weight [kg/m]

The new E6.1 generation has increased acceleration capability due to weight reduction - the e-chain® is also extremely quiet and highly dynamic.

Y = Noise level dB (A)

Series E61.29 underwent noise testing in the igus® lab and demonstrates a noise level at -2 dB(A) below the already class-leading noise level of the igus® Series E6.29.

igus® for cleanrooms - suitability of E6.1 e-chains®

By using a special material, the already low abrasion of the e-chain® can be reduced even further. In many applications where cumbersome special solutions are required, a simple standard e-chain® can be used instead. A comprehensive test programme was devised and performed for both gliding and unsupported use. For many applications, the e-chains® in special materials are virtually abrasion-free. IPA tests confirm that standard igus® e-chains® meet cleanroom requirements. "Tested and certified as very good!" e-chains® for cleanroom applications demand very high wear resistance of moving parts. e-chains®, for example, must be very wear-resistant, in order to meet the normal requirements for such a sensitive environment.

IPA classification - Report IG1303-640-1: ISO Class 1, according to standard DIN EN ISO 14644-1
for series E61.29.050.075.0.CR with v = 0.5m/s, 1.0m/s, 2.0m/s