igusigus-icon-cart(0)

Motor control

drylin® dryve D1 is a web-based motor control system for DC, 3-phase, EC and 2-phase stepper motors with up to 21 A peak currents and 48 V. The control system makes it possible to parameterise movements in seconds. Without programming knowledge. Single axes, line, flat and room linear robots as well as delta robots can therefore be put into operation faster than ever before.
 
Defining movements with a PC, laptop, tablet, or smart phone
You can start using it without software installation. All you have to do is connect the control system to a PC, laptop, tablet or smart phone and start the Internet browser. An integrated web server for data entry appears. Using the user interface, define travels, positions, speeds and run times in just a few minutes. All functions are intuitively understandable.
Number of products 9

drylin® D7- (X) stepper motor output stage

drylin® D7- (X) stepper motor output stage
  • Can control stepper motors with up to 2.7A continuous current at supply voltage of up to 48V
  • Ready to use immediately
  • Easy control
  • Exact positioning
INR 9,046.00/Pc.Cost-effective price break available onlineINR 7,722.00/Pc. 50 Pc.

4 variant(s), of which:

igus-icon-lieferzeit-dot
1 ready for shipping in 24 - 48 hours

drylin® D8- (X) stepper motor output stage

drylin® D8- (X) stepper motor output stage
  • 可在高达48V的供电电压下控制有高达4 A连续电流的步进电机
  • 可立即投入使用
  • 易于控制
  • 准确定位
INR 11,100.00/Pc.Cost-effective price break available onlineINR 9,250.00/Pc. 50 Pc.

4 variant(s), of which:

igus-icon-lieferzeit-dot
3 ready for shipping in 24 - 48 hours

drylin® D9- (X) stepper motor output stage

drylin® D9- (X) stepper motor output stage
  • 可以在高达48V的供电电压下控制有高达7A的连续电流的步进电机
  • 可立即投入使用
  • 易于控制
  • 准确定位
INR 12,166.00/Pc.Cost-effective price break available onlineINR 10,386.00/Pc. 50 Pc.

4 variant(s), of which:

igus-icon-lieferzeit-dot
1 ready for shipping in 24 - 48 hours

drylin® D3 for direct current motors

drylin® D3 for direct current motors
  • Simple automation directly using the control system without software and/or PC
  • Operation with limit switch or via power consumption
  • Left/right operation and speed control directly on the housing
  • Option for external switches/joysticks
  • Various modes of operation, such as tip operation and start to finish (semi-automatic)
  • Various adjustable acceleration ramps
  • Power supply via 24V/2.5A
  • Free pattern programs
INR 16,800.00/Pc.Cost-effective price break available onlineINR 12,880.00/Pc. 25 Pc.

1 variant(s), of which:

igus-icon-lieferzeit
1 ready for shipping in 3 weeks

drylin® D1 motor control system for stepper, DC and EC/BLDC motors

drylin® D1 motor control system for stepper, DC and EC/BLDC motors
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff
  • Free pattern programs
INR 47,355.00/Pc.Cost-effective price break available onlineINR 41,720.00/Pc. 10 Pc.

1 variant(s), of which:

igus-icon-lieferzeit
1 Delivery time on request

drylin® D2 motor control system for stepper, DC and EC/BLDC motors

drylin® D2 motor control system for stepper, DC and EC/BLDC motors
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff
  • Free pattern programs
  • Further information on dryve D1 info page
Upon request

1 variant(s), of which:

igus-icon-lieferzeit
1 Delivery time on request

drylin® D3-LM motor control system for DC motors with loop mode

drylin® D3-LM motor control system for DC motors with loop mode
  • Same dimensions as the standard D3
  • Extended functions for "Micro Automation"
  • Individually pre-programmed pendulum movements
  • Individually pre-programmed pause times between movements
  • All relevant documents for D3 dryve: Go to download portal
  • Free pattern programs

drylin D5 DC motor output stage

New
drylin D5 DC motor output stage

drylin D5 DC motor output stage 

  • Ready for immediate use. No parameterization or programming necessary
  • Left/right run via digital input
  • Velocities & accelerations via external PWM input signal
  • 12-24V supply voltage
  • 10A nominal current / 30A peak current
  • With housing for industrial use
  • Free pattern programs
Upon request

1 variant(s), of which:

igus-icon-lieferzeit
1 ready for shipping in 3 weeks

drylin D6 DC motor output stage

New
drylin D6 DC motor output stage

drylin D6 DC motor output stage 

  • Ready for immediate use. No parameterization or programming necessary
  • Left/right run via digital input
  • Velocities & accelerations via external PWM input signal
  • 12-24V supply voltage
  • 10A nominal current / 30A peak current
  • Free pattern programs
Upon request

1 variant(s), of which:

igus-icon-lieferzeit
1 ready for shipping in 3 weeks

Consulting

I would be happy to answer your questions personally

Ashish Rai
Ashish Rai

igus-icon-phone+91 7618792473

Shipping and consultation

In person:
Monday to Friday from 8am - 8pm.

Online:
24h

Shopping at igus®