Slewing ring bearings - iglidur® PRT

The range of igus® PRT polymer slewing ring bearings covers a wide spectrum of applications. Eight standard sizes are available between inner diameters 20 mm and 300 mm. In addition, the program includes very light and at the same time stable slewing ring bearings, for example with aluminum housings, angle limiters, external as well as internal splines, detent function and stainless steel. The maintenance-free and lubrication-free polymer slewing ring bearings are suitable for applications with high loads.

Expert for slewing ring bearings

Expert for slewing ring bearings

Enter application parameters and get suitable slewing rings and expected service life with just a few clicks.

Frequently asked questions about igus® slewing ring systems

Number of products 59

iglidur® PRT universal sliding elements, iglidur® J

New

iglidur® PRT universal sliding elements, iglidur® J

Universally applicable for large slewing rings
Cost-effective and ready to install
Tested in the igus® laboratory and material combination in use in many customer applications
Lubrication and maintenance-free

Upon request

1 variant(s), of which:

1 Delivery time on request

iglidur® slewing ring, PRT-05, low cost made of solid plastic

New

iglidur® slewing ring, PRT-05, low cost made of solid plastic

Lightweight design
Cost-effective solid plastic slewing ring bearing
Durable material combination iglidur® M260 and P4
Tested in the igus® laboratory
Made from at least 97% regranulate

Upon request

1 variant(s), of which:

1 Delivery time on request

iglidur® slewing ring, PRT-04, for cleanrooms

New

iglidur® slewing ring, PRT-04, for cleanrooms

Low wear and low emissions
Ready-to-install complete solution
Tested and proven by the Fraunhofer Institute
Maintenance-free and lubrication-free

Upon request

1 variant(s), of which:

1 Delivery time on request

iglidur® slewing ring, PRT-04, aluminium housing, sliding elements made from iglidur® J

New

iglidur® slewing ring, PRT-04, aluminium housing, sliding elements made from iglidur® J

For PRT slewing ring bearings with and without gear teeth
For PRT-01 and PRT-04 series
For all sizes

Upon request

8 variant(s), of which:

8 Delivery time on request

iglidur® slewing ring, PRT-02, made from at least 97% regranulate

New

iglidur® slewing ring, PRT-02, made from at least 97% regranulate

No lubrication or maintenance
Cost-effective, as it is made from at least 97% regranulate
Material combination tested in the igus® laboratory
Made from our regranulates

Upon request

1 variant(s), of which:

1 Delivery time on request

iglidur® slewing ring, PRT-01, inner diameter 700mm

New

iglidur® slewing ring, PRT-01, inner diameter 700mm

For large installation spaces and high resilience
Standard catalogue dimension 700mm inner diameter
Tested for load and wear in the igus laboratory
Ready-to-install solution with long service life

Upon request

iglidur® slewing ring, PRT-04 micro with preload, outer ring made of aluminium, sliding elements made of iglidur® J

iglidur® slewing ring, PRT-04 micro with preload, outer ring made of aluminium, sliding elements made of iglidur® J

Our smallest slewing ring bearing
With pre-load
Lightweight and robust, ideal for confined installation spaces
Wear-resistant and maintenance-free iglidur® sliding elements

Upon request

1 variant(s), of which:

1 Delivery time on request

iglidur® slewing ring, PRT-04 micro, outer ring made of aluminium, sliding elements made of iglidur® J

iglidur® slewing ring, PRT-04 micro, outer ring made of aluminium, sliding elements made of iglidur® J

Our smallest slewing ring bearing
Lightweight and robust, ideal for confined installation spaces
Wear-resistant and maintenance-free iglidur® sliding elements

Upon request

1 variant(s), of which:

1 ready for shipping in 2 weeks

iglidur® slewing ring, PRT-01, aluminium housing, sliding elements made from iglidur® J

iglidur® slewing ring, PRT-01, aluminium housing, sliding elements made from iglidur® J

Completely maintenance-free
Easy to install and replaceable sliding pads
High wear resistance
For very high loads and high stiffness
Aluminium housing
Replaceable, maintenance-free sliding elements made of iglidur® J (standard)

INR 15,126.00/Pc.Cost-effective price break available onlineINR 11,152.00/Pc. 100 Pc.

8 variant(s), of which:

7 ready for shipping in 24 hours

iglidur® slewing ring, PRT-04, aluminium housing, sliding elements made from iglidur® J

iglidur® slewing ring, PRT-04, aluminium housing, sliding elements made from iglidur® J

60% lighter and 50% more space-saving than PRT-01
Wear-resistant and maintenance-free iglidur® sliding elements
Easy to install and replaceable sliding pads
Easy replacement and extension: modular construction kit design
Cleanroom applications possible
Free data sheet to download
Free assembly manual to download

INR 13,481.81/Pc.Cost-effective price break available onlineINR 8,150.71/Pc. 2500 Pc.

8 variant(s), of which:

3 ready for shipping in 24 hours

iglidur® slewing ring, PRT-04, aluminium housing, sliding elements made from iglidur® J

iglidur® slewing ring, PRT-04, aluminium housing, sliding elements made from iglidur® J

A maximum of 1Nm screw torque allows a holding torque of up to 10Nm
Easily and quickly clamp the slewing ring
Defined location points every 90°
Universal sliding elements made of iglidur® J
Part of the extensive modular system

Upon request

8 variant(s), of which:

8 Delivery time on request

iglidur® slewing ring, PRT-04, aluminium housing, sliding elements made from iglidur® J

iglidur® slewing ring, PRT-04, aluminium housing, sliding elements made from iglidur® J

A maximum of 1Nm screw torque allows a holding torque of up to 10Nm
Easily and quickly clamp the slewing ring
Universal sliding elements made of iglidur® J
Part of the extensive modular system

Upon request

8 variant(s), of which:

8 Delivery time on request

iglidur® slewing ring, PRT-02, outer ring made from anodised aluminium, inner ring made from iglidur® J4

iglidur® slewing ring, PRT-02, outer ring made from anodised aluminium, inner ring made from iglidur® J4

Slewing rings with extremely low weight
Outer ring made of hard anodised aluminium
Collar clamps made from iglidur® J4
Completely maintenance-free
Easy installation
High wear resistance
For very high loads and high stiffness

Upon request

4 variant(s), of which:

3 ready for shipping in 24 hours

iglidur® slewing ring, PRT-04, locking mechanism

New

iglidur® slewing ring, PRT-04, locking mechanism

Easy release by hand
Defined location points every 90°
Compact, lightweight design
Part of the PRT-04 series modular construction kit

Upon request

8 variant(s), of which:

8 Delivery time on request

iglidur® slewing ring, PRT-01, toothed outer ring made from aluminium, sliding elements made from iglidur® J

iglidur® slewing ring, PRT-01, toothed outer ring made from aluminium, sliding elements made from iglidur® J

Four standards are available for the toothed version of the outer ring
Completely maintenance-free
Easy to install and replaceable sliding pads
High wear resistance
For very high loads and high stiffness
Housing and outer drive ring made of aluminium
Replaceable, maintenance-free sliding elements made of iglidur® J (standard)

INR 46,604.00/Pc.Cost-effective price break available onlineINR 33,550.00/Pc. 50 Pc.

32 variant(s), of which:

1 ready for shipping in 24 hours

iglidur® slewing ring, PRT-04, locking function with remote release

New

iglidur® slewing ring, PRT-04, locking function with remote release

Remote release over a distance of up to 5 metres
Easy release by hand
Defined location points every 90°
Compact, lightweight design
Part of the PRT-04 series modular construction kit

Upon request

8 variant(s), of which:

8 Delivery time on request

iglidur® slewing ring, PRT-04, toothed outer ring made from aluminium, sliding elements made from iglidur® J

iglidur® slewing ring, PRT-04, toothed outer ring made from aluminium, sliding elements made from iglidur® J

Four standards are available for the toothed version of the outer ring
Completely maintenance-free
Easy to install and replaceable sliding pads
High wear resistance
For very high loads and high stiffness
Housing and outer drive ring made of aluminium
Replaceable, maintenance-free sliding elements made of iglidur® J (standard)

Upon request

26 variant(s), of which:

9 ready for shipping in 2 weeks

iglidur® slewing ring, PRT-04, toothed inner ring made of aluminium, aluminium housing, sliding elements made of iglidur® J

iglidur® slewing ring, PRT-04, toothed inner ring made of aluminium, aluminium housing, sliding elements made of iglidur® J

Even more compact design possible
Classic spur gearing according to DIN3967
Housing and inner drive ring made of aluminium
Replaceable, maintenance-free sliding elements made of iglidur® J (standard)

Upon request

6 variant(s), of which:

6 Delivery time on request

iglidur® slewing ring, PRT-04, aluminium housing, sliding elements made from iglidur® J

iglidur® slewing ring, PRT-04, aluminium housing, sliding elements made from iglidur® J

For PRT-04
0.1° accuracy
External screen included
Lightweight construction
Ready-to-install measuring system

Upon request

1 variant(s), of which:

1 Delivery time on request

iglidur® slewing ring, PRT-04, black edition

iglidur® slewing ring, PRT-04, black edition

Elegant design
Anti-reflection black coating
Universal sliding elements in black made from iglidur® JB
Extensive modular system

Upon request

8 variant(s), of which:

8 Delivery time on request

Shopping at igus®

100,000
products online Delivery
from 24 h No minimum
order value Direct CAD
Download Free
samples Consultation
7:00 - 20:00

Easy payment

Invoice
Prepayment
Credit Card
Paypal

Reliable & safe

Consultation & support

Criticisms & wishes

disclaimer_EN