36/1, Sy No. 17/3, NCPR Layout, Euro School Road,
Dodda Nekkundi Indl Area, 2nd Stage, Mahadevapura Post,
Bangalore- 560048
E4.1 - ONE e-chains® series for virtually all applications
The E4.1 system combines all the benefits of its three predecessors and is the best igus® e-chain® in the product range. The E4.1 series are more stable with the same or smaller dimensions than their predecessors. Almost all accessory components and mounting dimensions are identical. With the igus® E4.1 system, the service life of your application can be increased still more and thereby lower costs.
Rugged, low-noise, modular. System E4.1 - utilized advantages of the tested and proven E4 series
Opening of the e-chain®: Push down the groove of the cross bar with a screw driver. Loosen by prizing (against the clamp)
Straight run and fast assembly through inner-/outer-link design Very high stiffening and carrying capacity when shear forces are at work by the tongue and groove design
You can find the right e-chain® quickly by entering concrete parameters and with the aid of a comparison table.
Assembly video with accurate description for joining, splitting and opening e-chains® and e-tubes.
Applications in various industrial sectors and in the igus® test laboratory.
Series E4.21
Inner height hi: 21 mm
Inner widths Bi: 30 - 120 mm
bending radii R: 38 - 200 mm
Pitch: 30.5 mm
Series E4.28
Inner height hi: 28 mm
Inner widths Bi: 40 - 300 mm
bending radii R: 55 - 250 mm
Pitch: 46 mm
Series E4.32
Inner height hi: 32 mm
Inner widths Bi: 50 - 400 mm
bending radii R: 63 - 300 mm
Pitch: 56 mm
Series E4.42
Inner height hi: 42 mm
Inner widths Bi: 50 - 400 mm
bending radii R: 75 - 350 mm
Pitch: 67 mm
Series E4.56
Inner height hi: 56 mm
Inner widths Bi: 50 - 600 mm
bending radii R: 135 - 500 mm
Pitch: 91 mm
Series E4.80
Inner height hi: 80 mm
Inner widths Bi: 50 - 600 mm
bending radii R: 150 - 1000 mm
Pitch: 111 mm
E4.112 series
Inner height hi: 112 mm
Inner widths Bi: 50 - 600 mm
bending radii R: 200 - 1000 mm
Pitch: 143 mm
E4.162 series
Inner height hi: 162 mm
Inner widths Bi: 200 - 600 mm
bending radii R: 250 - 1000 mm
Pitch: 200 mm
Series 800
Inner height hi: 200 mm
Inner widths Bi: 200 - 600 mm
bending radii R: 325 - 1000 mm
Pitch: 250 mm
Series 840
Inner height hi: 204 mm
Inner widths Bi: 100 - 563 mm
bending radii R: 325 - 1000 mm
Pitch: 250 mm
Series E4.350
Inner height hi: 350 mm
Inner widths Bi: 400 - 800 mm
bending radii R: 500 - 1000 mm
Pitch: 470 mm
Series H4.32
Inner height hi: 32 mm
Inner widths Bi: 50 - 400 mm
bending radii R: 63 - 300 mm
Pitch: 56 mm
Series H4.42
Inner height hi: 42 mm
Inner widths Bi: 50 - 400 mm
bending radii R: 75 - 350 mm
Pitch: 67 mm
Series H4.56
Inner height hi: 56 mm
Inner widths Bi: 50 - 600 mm
bending radii R: 135 - 500 mm
Pitch: 91 mm
Series H4.80
Inner height hi: 80 mm
Inner widths Bi: 50 - 600 mm
bending radii R: 150 - 1000 mm
Pitch: 111 mm
Series R4.28
Inner height hi: 28 mm
Inner widths Bi: 50 - 300 mm
bending radii R: 63 - 250 mm
Pitch: 46 mm
Series R4.32
Inner height hi: 32 mm
Inner widths Bi: 50 - 300 mm
bending radii R: 125 - 300 mm
Pitch: 56 mm
Series R4.42
Inner height hi: 42 mm
Inner widths Bi: 50 - 300 mm
bending radii R: 125 - 350 mm
Pitch: 67 mm
Series R4.56
Inner height hi: 56 mm
Inner widths Bi: 75 - 462 mm
bending radii R: 150 - 500 mm
Pitch: 91 mm
Series R4.80
Inner height hi: 80 mm
Inner widths Bi: 150 - 460 mm
bending radii R: 200 - 1000 mm
Pitch: 111 mm
Series R1608
Inner height hi: 112 mm
Inner widths Bi: 200 - 400 mm
bending radii R: 250 - 600 mm
Pitch: 143 mm
R4.112 series
Inner height hi: 112 mm
Inner widths Bi: 200 - 400 mm
bending radii R: 250 - 1000 mm
Pitch: 143 mm
Guide corrugated tubes in parallel
E4.1L TUB - Safe routing of corrugated tubes parallel to an e-chain®
Assembly tool for E4-series
For the practical opening and closing of the E4 series. Big savings in assembly time
Snapclip - clip-on cable holder
Snapclip - clip-on cable holder, as clip-on lateral guide for hoses and cables
Smooth, cable friendly inner surfaces
Low noise operation through integrated "brake" on the radial stop dogs
Sound dampers as an additional noise-reducing option
Wide application range
Numerous interior separation options
Large accessory kits
Widths up to 2000 mm through extension links
To open on both sides
Max. travel distance: Over 200 m
Krane
Indoor Cranes
Composting systems
Sewage treatment plants
Machine tools
General mechanical engineering
Materials-Handling Technology
Refrigeration engineering
Construction machinery
Wood working
Robotics and handling systems
IPA classification - Report IG 1303-640, tested E4.32.10.063.0
41 dB(A) determined in the igus® laboratory, v = 1.8 m/s unsupported
ESD classification: electrically conductive ESD versions upon request
E4.1 system, tried and tested for very long travels
e-tubes available as custom design with HT material for 850 °C swarf
IPA Classification
Report IG 1303-640, tested series E4.32.10.063.0