drylin® E electric motors

For linear axes and handling systems, igus offers a wide range of electric motors. Hybrid stepper motors or DC motors are used in lead screw drives, toothed belts and

rack and pinion drives. The electric motors complete the range offered by igus automation technology. In this way, entire handling systems can be configured in combination with linear axes.

Stepper motors

• Powerful in five sizes
• Motors with metric connector or stranded wires
• With encoder and brake for extra safety
• Increased anti-rotation feature due to machined flat motor shaft (D-cut)

Direct-current motors

• Also available with protective housing
• Torques from 0.1 to 1.8Nm
• Speed up to 440rpm
• Increased anti-rotation feature due to machined flat motor shaft (D-cut)

EC/BLDC motors

• With Hall and encoder
• Installation sizes NEMA: 17, 23 and 34
• Virtually wear-free
• Very high speeds
• More cost-effective than conventional servomotors

Lead screw stepper motors

• Three installation sizes with stranded wire and holding torque from 0.1 to 2Nm
• Seven lead screw types with pitches from 0.8mm to 50mm
• Highest precision 
• Matching lead screw nuts available
• When using a stepper motor without an encoder, the lead screw can be attached on either side

Stepper motor with IP68 protection against water

• Installation size: NEMA23/flange installation size 56mm
• Protection class motor housing: IP68 (10m)
• Holding torque: 1.30Nm
• Nominal current: 4.20A
• Motor connection: terminal box

Direct-current motor with worm gear

• With spline
• Space-saving and compact design
• Torque from 0.75Nm up to 2.00Nm
• Speed up to 350rpm
• Quiet operation
• Rotary position encoder included

For electric motors

Find the right motor in only a few steps

With the expert, you can find the right one for your application in just a few clicks. Simply enter your desired criteria.

For electric linear drives

Find the right linear system in only a few steps

Assemble the suitable electric motor quickly and easily in just a few steps with our linear system.

For lead screw motors

Find the right lead screw motor in just a few steps

Find the right solution in just a few clicks: simply enter requirements and get the right results.

drylin® E motor control systems

Travels, positions, speeds and operating times can be easily defined with the stepper motor dryve D1 via a control system that is based on a web interface. The dryve D3 DC motor control system makes it possible to easily control linear systems.

• Quick initial operation
• Simple and intuitive user interface
• Compatible with many industrial control systems
• For all drylin® linear axes

drylin® E sample programmes

Save time and money with the free igus® sample programmes (sample codes)

• Download programmes with master/control system programme & dryve parametrisation
• Compatible with industrial manufacturers (Siemens, Beckhoff, Wago etc.)
• Compatible with commercially available single-board computers/developer boards
  (Arduino, Raspberry Pi, BeagleBone)