What is the difference between Ethernet CAT 5e, CAT 6/CAT 6A, CAT 7 & CAT 8 cables?

Ethernet cables connected to a network router with lit ports and status lights.

CAT 5/CAT 5e: The most common cable*

  • CAT 5 and CAT 5e cables are generally used for the 1000BASE-T standard.
  • Hardware such as the computer itself is often the bottleneck in the system.
Cut drawing of an Ethernet cable with four twisted pairs and numbered conductors.

Questions about CAT 5:

  • CAT 5: transmission rate of up to 100MBit per second
  • CAT 5e: transmission rate of up to 1GBit per second

CAT 6 and CAT 6A: Ideally suited for companies

  • CAT 6 cables can only reliably transmit 1Gbit per second up to a length of 50 metres and have a frequency of 250MHz. However, the range can be increased with intermediate switches.
  • CAT 6A is a further development of CAT 6 and enables transmission speeds of up to 10Gbit per second at a range of up to 100 metres. With a maximum frequency of 500MHz and individually shielded core pairs, reliable data transmission is guaranteed even when the cable is in motion.
Cut drawing of an Ethernet cable with multiple conductors and numbered markers.

Questions about CAT 6:

  • CAT 6: transmission rate of up to 1GBit per second
  • CAT 6A: transmission rate of up to 10GBit per second

CAT 7: For the most demanding applications

  • All category 7 cables have four separately shielded core pairs, which in turn are additionally shielded by an overall shield. This means they are optimally protected against external interference.
  • There are two standardised connector types for CAT 7 network cables.
  • They are recommended for the future security of the infrastructure in new buildings.
Cross-section of a CFBUS cable with numbered conductors and color-coded cores.

Questions about CAT 7:

  1. GG45 (downwards compatible with RJ-45 for office cabling)
  2. TERA (preferred for multimedia applications)

CAT 8: Extreme speed for data centres

  • 8.1 uses commercially available RJ45 connectors, which are compatible with most existing network infrastructures.
  • 8.2, which uses special connectors, is currently still under development and offers an alternative solution for applications with the highest performance requirements.

Specifications of the Ethernet cables

Table of Ethernet cables with types, electrical performance and CAT values for various igus cables.

Conclusion

Consulting

I look forward to answering your questions

ravikumar
Ravikumar Alloli

Head of BU - Chainflex

+91 93428 28642Write e-mail

Shipping and consultation