myigus
Shopping Cart
(0)
My contact person
igus® (India) Pvt. Ltd.

36/1, Sy No. 17/3, NCPR Layout, Euro School Road,

Dodda Nekkundi Indl Area, 2nd Stage, Mahadevapura Post,

Bangalore- 560048

+91 80 68127800
+91 80 68127802
Send message
See all contacts
IN(EN)
Menu
  1. Home
  2. Electric motors
  3. drylin® E stepper motor with connector, NEMA 17

drylin® E stepper motor with connector, NEMA 17

  • Installation size: NEMA17/flange installation size 42 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 0.50 Nm
  • Nominal current: 1.80 A
  • Motor connection: Metric connector

Unsure whether it fits?

Download CAD files
Free sample request
Configurator for drive technology with motor
Configurator for drive technology with motor

Here you can assemble a complete linear axis including motor, connection cables and attachments with a few clicks.
Product description
NEMA17: Small, but lots of power
 
This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads.
 
Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection.
 
The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water.
 
 
Certificates and standards
CE<br>EMV guideline
Technical data
Downloads

Other solutions

Jaw coupling with square axis clamp
Jaw coupling with square axis clamp

Vibration dampening and easy fitting

from 52.36 EUR/Pc.
Jaw coupling with round axis clamp
Jaw coupling with round axis clamp

Vibration dampening and easy fitting

from 43.36 EUR/Pc.
Motor flange for stepper and DC motors (motor bell)
Motor flange for stepper and DC motors (motor bell)

Matches the drylin® E coupling

from 25.28 EUR/Pc.
chainflex® Connection cable straight M12 x 1, CF.INI CF9
chainflex® Connection cable straight M12 x 1, CF.INI CF9

Socket at the cable front, cable ends cut

from 16.37 EUR/Pc.
chainflex® Connection cable angled M12 x 1, CF.INI CF9
chainflex® Connection cable angled M12 x 1, CF.INI CF9

Socket at the cable front, cable ends cut

from 16.48 EUR/Pc.
chainflex® CF240 data cable
chainflex® CF240 data cable

For medium duty applications, PVC outer jacket, shielded, oil-resistant and flame-retardant

from 1.73 EUR/m
chainflex® CF240.PUR data cable
chainflex® CF240.PUR data cable

For medium duty use, PUR outer jacket, shielded, resistant to oils / coolants, notch-resistant, free of PVC and halogen, flame-retardant, resistant to hydrolysis and microbes

from 2.20 EUR/m
External braking resistors (power class 50/75/100 W) for EC/BLDC motors
External braking resistors (power class 50/75/100 W) for EC/BLDC motors

NEMA17-34

Upon request