Laboratory SCARA robot with three DOF Our SCARA robots can be used individually and flexibly. It has three degrees of freedom and can be equipped with or without a control system. The SCARA can be used for applications with precision requirements of 0.5mm with a load of up to 0.5kg. This type of robot is typically used at cycle times of > 6 picks/minute. The suitable
igus Robot Control software can be downloaded free of charge in advance and is available as a version with control system in the control cabinet or as a top-hat (DIN) rail version. Our SCARA robots consist largely of our tribologically optimised plastics and enable significant cost savings. At the same time, a long service life and freedom from maintenance are offered.
Application examplesTypical applications of our SCARA robots include pick & place applications, sample handling and much more.
Robot control system for an easy entry into automationThe SCARA is compatible with the igus Robot Control, which enables a simple and intuitive system for robot control and programming, making it
easy to get started with automation. The modular design makes it possible to control various igus kinematics, such as SCARA robots. The SCARA robot can be controlled directly with all its advantages using our igus® Robot Control.
The free-of-charge, licence-free igus Robot Control software is integrated into the control system and thus makes use of a uniform operating concept and consistent communication services for many components of a system. This means
less project planning and
faster commissioning.
The igus Robot Control is not a component of the part and can optionally be purchased from us. A master control system is not necessary.
If you want to use your own (robot) control system, that's no problem either.
Alternatively, it is also possible to operate each axis individually with a control system. For example, with our igus® D1 dryve motor control system. With this control architecture, you need one motor control system per linear axis or motor and an additional master control system, which controls the coordination of the movement. You must then program the inverse kinematics for the delta robot yourself on your development environment.
The motor control systems are not a component of the part and can be ordered from us as an option. A master control system is currently not offered by igus.
