xiros® radial deep groove ball bearing, xirodur F180, stainless steel balls, cage made of PE, mm

1 of 2

Antistatic conductive
Suitable for contact with food according to EU/FDA
Volume resistivity <1012 Ωcm
Application temperature: -40 °C to +80 °C
Ring material: xirodur® F180
Cage material: PE (polyethylene)
Ball material: stainless steel

Item no.

BB-6005-F180-50-ES

Ø d2 [mm]

b1 [mm]

Ø d1 [mm]

Installation size

6005

xirodur® F180 | Antistatic conductive

The material xirodur® F180 has a low electrical contact resistance and can therefore dissipate unwanted electrostatically induced voltage. The material offers medium wear resistance and, in combination with the cage material made of PE, is available as a ball bearing with FDA-compliant components.

Typical areas of application:

Packaging industry
Food industry
Semiconductor industry
Film production

Tolerances and measuring system:

The tolerances for inner and outer diameters depend on the size. These are often approx. ±0.05 mm to the nominal dimension. The bearing rings are usually injection molded and naturally exhibit a certain ovality. For this reason, the caliper gauge is used to measure 90° to the injection point (if present) over the entire width of the bearing. The dimensions and tolerances are designed to meet an easy press fit by hand when using a H7 mounting as well as shaft h6. Additional axial securing by means of a circlip (shaft) and snap ring (housing) is recommended to prevent axial displacement.